BD1.4F-AUTO.3
Direct Current Compressor
R134a
12V DC
t〇〇l4.c〇〇i!
Flexible control set1
 
General

Code number (without electronic unit)	109Z0104
Electronic unit - Automotive	101N1010, 30 pcs: 101N1011
Approvals	-
Compressors on pallet	180

BD1.4F-AUT0.3
only with BD controller
SECOP
R134a
Blue stripe ^
Barcode on white background
Grey background
Country of origin or manufacturer
；SB：
 
«rlal numberi *| 〇9Z
|〇104
^■•Made by Secop
Application

Application		LBP/MBP
Evaporating temperature	°C	-25 to 5
Voltage range	VDC	8.5-17
Max. condensing temperature continuous (short)	°C	60 (70)
Max. winding temperature continuous (short)	°C	125 (135)

Cooling requirements

Application	LBP	MBP	HBP
32°C	S	S	-
38°C	S	S	-
43°C	S	S	-
Remarks on application: New generation with optimized noise level during rough vehicle motions.

S = Static cooling normally sufficient
O = Oil cooling
F₁ = Fan cooling 1.5 m/s
(compressor compartment temperature
equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
SG = Suction gas cooling normally sufficent
一 =not applicable in this area
Motor

Motor type	permanent magnet, brushless DC
Speed rpm	3,000
Resistance, all 3 windings (25°C) mO	370

Design

Displacement	cm3	1.41
Oil quantity (type)	cm3	75 (polyolester)
Maximum refrigerant charge	g	150
Free gas volume in compressor	cm3	500
Weight - Compressor/Electronic unit	kg	2.1/0.17

Standard battery protection settings (refer to 101N1000 Instructions for optional settings)

Voltage			Min. value	Default	Max. value
Cut out	(0.1 steps)	VDC	8.5	8.5	17
Cut in diff.	(0.1 steps)	VDC	0.5	0.5	8

Dimensions

Height	mm	A	96.25
		B	91.25
		B1	88.00
		B2	25.20
Suction connector	location/I.D. mm | angle	C	6.2 | 25°
material | comment		Cu-plated steel | Al cap
Process connector	location/I.D. mm | angle	D	6.2 | 25°
material | comment		Cu-plated steel | Al cap
Discharge connector	location/I.D. mm | angle	E	5.0 | 0°
material | comment		Cu-plated steel | Al cap
Connector tolerance	I.D. mm	±0.09, on 5.0 +0.12/+0.20

Remarks